maintenance ais
Maintenance Aerosols
  • Industrial aerosols are used by engineers and technicians because they present a convenient and economical means of applying specialist aerosol cleaning fluids and aerosol lubricants to plant, machinery and other assets that are situated on site.
  • We offer a comprehensive range of aerosol products for use in the workshops of industry, in garages and logistics, food production, and in government agencies and local authorities. 

FAST DRYING CLEANING SOLVENT

:   kg
!
Larger picture
Fast Drying Solvent Cleaner for Electrical and electronics cleaning

FAST DRYING CLEANING SOLVENT FOR ELECTRICAL AND ELECTRONIC EQUIPMENT is a low aromatic and fast evaporating, non-chlorinated, general purpose solvent degreaser

  • Suitable for electrical and electronic cleaning applications.
  • Safe on most plastics.
  • Highly flammable

UNDO-IT PENETRATING OIL - 12 x 500ml aerosols
:   kg
!
penetrating and release oil
Classic, clear penetrating oil & release fluid.

Penetrates conditions of near no tolerance.

  • Undo-It penetrating oil frees nuts, bolts, and fittings seized and corroded by rust, carbon,red or white lead, tar, or dried carbonised grease.
  • Inhibits further corrosion. 

MAIN-SPRAY MAINTENANCE SPRAY - 12 x 400 ml aerosols
:   kg
!
Larger picture
  • MAIN-SPRAY multi-purpose maintenance spray is a blend of penetrating solvents, water dispersing agents, and corrosion inhibitors.
  • Displaces water from damp or wet components, and penetrates deep to prevent water traps.
  • Leaves a protective waterproof film to guard against corrosion.
  • Lubricates and increases the efficiency of working parts.
  • Cleans.
  • Use MAIN-SPRAY maintenance spray to pre-spray electrical connections to prevent short-circuiting due to water.
  • Use on damp connections to displace moisture which may be causing problems.
  • Maintenence spray penetrates and helps free up seized threads and bearings.
  • Protects against further corrosion, cleans grime from threads and components.
  • Do NOT spray on short circuits where sparking is likely.

ALUMINIUM ANTI-SEIZE - 12 x 400 ml aerosols
:   kg
!
Larger picture
Aluminium anti-seize compound.
  • Anti-seize spray enables nuts and bolts to go on tighter
  • Prevents them corroding, pitting, seizing, and distorting through intense heat.
  • Resists water washout, salt, spray, steam, and weathering.
  • Inert to natural and synthetic rubber. 

SPROCKET CHAIN AND CABLE LUBE - 12 x 400 ml aerosols
:   kg
!
Larger picture
Chain and cable lubricant, suitable for steel core and hemp core cables.
  • SPROCKET CHAIN & CABLE LUBE cleans, penetrates and lubricates.
  • Formulated to ensure maximum penetration and protection of chain links and wire ropes against corrosion.
  • The carrier solvent in Sprocket chain lube evaporates, leaving behind an extreme pressure lubricant that will not wash-off or attract dust.
  • SPROCKET CHAIN and CABLE LUBRICANT is suitable for a variety of industrial, agricultural, marine, automotive applications
  • Withstands elevated temperatures, extreme cold and steam. 

OIL-CAN - 12 x 400 ml aerosols
:   kg
!
Larger picture
AN OIL-CAN IN AN AEROSOL
  • OIL-CAN is a blend of high grade lubricants for convenient, safe, fast and economical application.
  • OIL-CAN is fast and time-saving. It can be used whilst plant and machinery is in motion, but safety guards must NOT be removed.
  • Pin-point accuracy.
  • No spillage, no waste, no deterioration and no loss by evaporation.
  • Typical applications are found in all industries, but the non-toxic nature of the product renders it useful in food processing plants where there is no possibility of it coming into contact with food.
  • Useful in the manufacture of food associated products such as packaging, food machinery and food/drinks vending machines.
  • OIL-CAN is ideal as a lubricant for rollers, guides, rails, cams, chains, dicers, slicers, gears, cables and conveyors. It can be used anywhere currently being served by the conventional oil can.

TAPPER - CUTTING AND TAPPING FLUID - 12 x 400 ml aerosols
:   kg
!
no_photo
Heavy duty extreme pressure cutting and tapping fluid in aerosol format.
  • TAPPER CUTTING AND TAPPING FLUID is a blend of high grade lubricants and extreme pressure additives.
  • Formulated for drilling and thread-cutting on a wide range of ferrous and non-ferrous material, including stainless steel and titanium.
  • Always ready to use, convenient, safe, fast and economical.
  • TAPPER improves the service life of dies and taps by reducing friction and thus heat.
  • Provides a clean, high quality cut, and is non-corrosive.
  • The EP additives prevent pitting, galling and metal seizures during application.
  • TAPPER can be applied to either the cutting tool or the component that is being worked on.
  • Quick and easy.
  • No spillage, no waste, no deterioration and no loss by evaporation.

FOOD INDUSTRY HIGH TEMP CHAIN SPRAY - 12 x 500ml aerosols
:   kg
!
high temperature chain lubricant
FOOD-GRADE AEROSOL LUBRICANT

HIGH-TEMP CHAIN SPRAY is a fully synthetic food grade high temperature chain lubricant in an aerosol, with characteristics that make it particularly suited for the lubrication of drive chains and conveyor chains in the food processing industry. .

  • Contains special additives that extend relubrication intervals considerably
  • Does not contain mineral oil.
  • Operating temperature range: -30 deg C to + 240 deg C

GEAR-SLIDE OPEN GEAR SPRAY - 12 x 400 ml aerosols
:   kg
!
Larger picture

GEAR-SLIDE is a heavy duty, extreme pressure open gear lubricant designed for use on open gearing and sliding surfaces.

  • This gear lube contains Molybdenum Disulphide, minimising wear, providing a dry film of lubrication even when the oils have been squeezed out.
  • The product is packed in handy 400ml aerosols for easy application, especially for hard to reach areas.
  • GEAR-SLIDE open gear spray does not drip and will not sling off gears.
  • Safe to use on all metals of construction, including phosphur-bronze.
  • Ideal for marine applications, and gears or wire ropes operating under water, in areas of high humidity, or in extreme weather conditions.
  • GEAR SLIDE open gear lubricant is designed for lubricating not only exposed gears, but also wire ropes, cams, shovels, shears, presses, winches, bevel gears, ball mills, girth and pinnion gears, on manufacturing equipment in mining, quarrying, oil-drilling, earthmoving equipment, foundries, drop-forging hammers, overhead cranes, etc.
  • The open gear spray is environmentally friendly, contains no CFCs.. 

LEAK-SEEK - 12 x 400 ml aerosols
:   kg
!
gas leak detector aerosol

GAS LEAK DETECTOR

LEAK-SEEK GAS LEAK DETECTOR produces a micro-porous foam showing up the smallest leak instantly.

  • Safe on paintwork, metals, metals, wood and most plastics.
  • Non-corrosive and biodegradable.

BITUMAX - 12 x 400ml aerosols
:   kg
!
Bitumastic rubber underseal in aerosol.
Bitumastic rubber underseal spray is highly flexible and suitable for use on all metals. Great as a short term minor repair on gutters and roofs. 

FSL - 12 x 400ml aerosols
:   kg
!
Larger picture
Foof-safe lubricant - Ideal for use in food / drink / water industries

Our own brand Food Safe Lubricant is odourless, colourless, for use in the food processing industry. It is formulated to penetrate cable cores and is ideal for use on conveyors, cables, chains, cams, castors, hinges, bearings and gears. For use where incidental food contact may occur. Operating temperature from 5ºC to 210ºC

 Benefits:   

  • No smell - non-tainting
  • Efficient lubricant
  • Colourless
  • Free from mineral hydrocarbon solvents
  • Aerosol spray application
  • Non toxic
  • No taste
  • Biodegradable

COLD GALV ZINC-RICH PRIMER - 12 x 400ml aerosols
:   kg
!
Larger picture
COLD GALV ZINC-RICH PRIMER Provides long-lasting protection against corrosion, even in  hostile salt-water environments
Zinc Rich Primer is a high quality coating formulated for touch up of damaged or weathered galvanised surfaces.

Unlike paint, it will not allow for rust to creep underneath the surface. Zinc Rich Primer is an excellent alternative to Hot Dip Galvanizing. It does not require any heat and can be applied on-site. After being applied, Zinc Rich Primer provides the highest level of galvanic protection. The film of Zinc Rich Primer is conductive. It will not allow steel to corrode, even when the surface is scratched.

If surface is scratched or dented, zinc in the surrounding area will provide further galvanic protection preventing corrosion. ZRP can be used without a topcoat, or as a high performance primer with a variety of topcoats.
Zinc Rich Primer is applied at ambient temperature; no heat is required.

COLD GALVANISING SPRAY - 12 x 400ml aerosols
:   kg
!
Larger picture
Colour-matched, Zinc Oxide, Cold Galvanising Spray Top Coat
COLD GALVANISING SPRAY provides the protection of Zinc and the appearance of Hot Dip Galvanizing. By matching the appearance of the finished Hot Dip, Zinc Oxide Cold Galvanising compound requires only one application, eliminating the need for an aluminum topcoat. This is especially helpful for Fence and Gate contractors.

MOLY-DRY - DRY FILM LUBRICANT SPRAY - 12 x 400 ml aerosols
:   kg
!

A Dry Film Lubricant spray based on Molybdenum Disulphide and Graphite for exceptional dry lubricity and wear resistance.

  • Bonds to most surfaces.
  • Does not attract dust and grit. Excellent pre-lube. 
  • Minimises metal to metal contact (cold welding).
  • Resists rusting and corrosion.
  • Molybdenum disulphide plates are deposited onto metal surfaces and give maximum lubrication and wear resistance
  • Effective lubrication at high temperatures of up to 350°C.
  • An effective dry lubricating film for a wide variety of materials such as ferrous and alloy metals, as well as most other metals and plastics.
  • Use for maintenance and lubrication of Chains, Gears, Hinges, Automotive and Industrial Gaskets, Conveyors and Couplings.

HEAVY DUTY ADHESIVE SPRAY - 12 x 500 ml aerosols
:   kg
!
OUR OWN BRANDED SPRAY GLUE - 12 aerosols per case

 A heavy duty spray adhesive in aerosol for convenient application.

  • Very high initial tack
  • Bonds foam to foam
  • Bonds fabrics, wood, concrete, metal, plastic, rubber and polythene
  • Great for laying foam backed carpets
  • Great for fixing vehicle interior trimmings
  • Fixes insulation materials 
  • Coverage : 3-4 sq mtrs per litre

(Not suitable for vinyl & linoleum)

SUPERLUBE - 12 x 400ml aerosols
:   kg
!
OURR OWN BRAND CLEAR LUBRICANT THAT ALSO WATERPROOFS AND PROTECTS
  • Superlube is a multi purpose synthetic lubricant containing Teflon for added lubricity, giving superior anti-wear performance.
  • Ideal for use on curtain rails, sticking drawers, children's toys, bicycles, locks, linkages, hinges, garden tools,  screw threads, sail tracks, winches, etc.
  • Non-staining and odourless.
  • Cleans while lubricating leaving behind a corrosion protectant that does not attract dust. 

N.B. The prices shown do not include VAT
!

Excalibur Hygiene Limited, Units 4/5 Dadsford Bridge Industrial Estate, Plant Street, Wordsley, Nr. Stourbridge, West Midlands DY8 5SY.
Tel: +44 (0)1384 671505     |     (Fax: +44 (0)1384 671256)
e-mail: sales@excalibur-hygiene.co.uk

All Trade Marks acknowledged and respected.

Copyright Excalibur Hygiene Limited